Restore your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may want to reset your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the settings or are experiencing unexpected behavior. Fortunately, resetting your Holosun is a easy process that can be completed in just a few steps.

• Initially ensuring your red dot sight is turned on.
• Locate the small reset button on the rear of the unit.
• Employ a paperclip to activate the reset button for approximately 5 seconds.
• Release the switch and your Holosun EPS Carry Red Dot sight will power cycle.
• Your red dot sight should now be reverted to its factory settings.

Reset Your Holosun EPS Carry Red Dot toward Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to return to original, resetting it back to standard configuration is a breeze. First, determine the tiny button on the bottom of your optic. Then, sustain it for around twelve seconds until you see a brief flash. Your Holosun EPS Carry is now reverted to its factory settings, ready for consistent targeting.

restore Your Holosun EPS Carry Back to Life

Is your beloved Holosun EPS Carry experiencing some performance problems? Don't despair! A simple factory reset can often fix the problem and get your red dot sight back to its former glory. Before you begin, remember to detach the battery from your Holosun EPS Carry to prevent unintended activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these simple steps:

• Simultaneously press and hold the power button for approximately 10 seconds.
• The display will flash, indicating that the reset is in progress.
• Let go of the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can re-attach the battery and test your sight's functionality. If you encounter check here any further difficulties, don't hesitate to contactsupport team.

Return Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Follow these steps carefully to ensure a successful factory reset.

• Beginning with, Activate your Holosun EPS Carry by pressing the power button.
• Next, press and hold both the mode button and the up/down adjustment button simultaneously.
• As you continue holding these buttons, activate the power button once.
• You will show a confirmation prompt indicating that the reset process is initiated.
• Allow the process to conclude. This may take a few moments. Once done, your Holosun EPS Carry will automatically power off.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Clear All Settings on Your Holosun EPS Carry

To Factory reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Pressing a specific button combination. Consult your Manual for the exact button sequence for your model. Once in the settings menu, look for an option that says "Clear Settings". Select this option and confirm the reset. Your sight will then power off and restart with all settings Returned to their default values.

Restore your Holosun EPS Carry via a Factory Standard Settings

If your Holosun EPS Carry is acting up, a factory reset might be the solution. This will set back your sight to its factory settings, clearing any custom configurations you've made. To execute this reset, observe these easy steps:

• To begin, find the reset button on your EPS Carry.
• Next, press a fine object, like a toothpick, to push the reset switch.
• While hold the reset switch activated, power on your EPS Carry.
• It will display a message showing that the reset is complete.

When the reset is finished, your EPS Carry will be returned to its factory settings.

Report this wiki page